Options Available • tilt axle • articulating tilt axle • warning light kit • laser mount • replaceable bushings on swivel hitch • rippers
The standard 12 ft. model 8010 feedlot/construction scraper (shown here) dumps at 27" and weighs 4600 lbs. Horsepower range of this series, depending on model, is 170 to 275.

Go to Specifications

		Heavy double-plated rear axle, 5/8" sides Replaceable axle pivot bushings Replaceable hydraulic cylinder bushings 5" x 20" hydraulic cylinder, 1.75" pins 10 ply 16.5L x 16.1 tires Two 6000 lb. hub and spindles Models 8014 and 8016 have a detachable tongue.
		6,600lb vertical load Draft load of 85,000 lbs 1.5" drawpin Optional clevis with 1.25 x 1.75 slotted hole
		12ft. standard scraper, with 3/8" sides - 4600 lbs. Optional sides in 1/2", 5/8" and 3/4" Sides have 10" channel inside bracing Replaceable blades on side wear edges Bottom cutting blade is 3/4" x 8" curved Available in 10ft., 12ft., 14ft., and 16ft. wide

Ripper (optional)
old tongue can be removed and new tongue with rippers can be bolted in its place